close
close

How To Use Sharkbite Fittings With Copper

How To Use Sharkbite Fittings With Copper. Sharkbite fittings can be used on both hot and cold water lines.sharkbite fittings work well with pex, cpvc, and hard drawn copper.sharkbite universal fittings have a maximum temperature of 200°f maximum pressure 200 psi when used on copper pipe.sharkbites are approved for use. The simple fittings make plumbing pipe repairs and modifications more accessible to the average homeowner.

How to use SharkBite Fittings YouTube
How to use SharkBite Fittings YouTube from www.youtube.com

.cut pipe cleanly & squarely. When installing sharkbite fittings always measure and mark any copper pipe that the sharkbite fitting will be sliding onto. How to use sharkbite fittings for easy fix.

You Push A Tube Into The Fitting, Far Enough That It Grabs A Hold Of The Pipe.

If you have to restore or substitute copper plumbing in your house, a sharkbite becoming is a wonderful alternative.sharkbites are authorized for use underground and behind partitions, however putting in them there may be dangerous. Using a slight twisting motion, push the pipe firmly into the sharkbite fitting until you hit the tube stop. Be sure the pipe is free of scratches or debris and cut the pipe as cleanly and squarely.

Sharkbite Fittings Can Be Used On Both Hot And Cold Water Lines.sharkbite Fittings Work Well With Pex, Cpvc, And Hard Drawn Copper.sharkbite Universal Fittings Have A Maximum Temperature Of 200°F Maximum Pressure 200 Psi When Used On Copper Pipe.sharkbites Are Approved For Use.

This is much faster than soldering your pipes together. One fitting connects to the end of a pipe while the other fits into the end of another pipe. When installing sharkbite fittings always measure and mark any copper pipe that the sharkbite fitting will be sliding onto.

There Are No Tools Needed, And Connecting Them Takes Seconds.

Once the copper pipe bottoms out inside the measuring tool, mark the copper pipe. You can buy these with both. How to use sharkbite fittings for easy fix.

These Fittings Are Usually Sold In Pairs.

The pipe was not properly deburred prior to installation. You’ll need to cut the pipe to size and push it into the appropriately sized sharkbite fitting. The fittings are durable enough to be installed on plumbing inside walls, and last as long as copper fittings.

Sharkbite Universal Fittings (3/8 To 1) Come With An Integral Pex Stiffener.

Cut the copper pipe such that the ends are clear and sharp. Sharkbite universal fittings have a maximum temperature of 200°f maximum pressure 200 psi when used on copper pipe. The sharkbite fitting must push all the way to the line.

Leave a Reply