close
close

How To Light Pilot Light On Valor Gas Fireplace

How To Light Pilot Light On Valor Gas Fireplace. Using the remote, hold the small flame button until the flame goes out. The gas line to the system itself needs to be open.

Gas Fireplace Thermocouple Decorations / Gas Fireplace Won
Gas Fireplace Thermocouple Decorations / Gas Fireplace Won from loneli-gal.blogspot.com

Use a can of compressed air to blow the dust and dirt off of the end of the innermost tube. Keep trying periodically to light the pilot light. How do you light the pilot on a valor fireplace?

Using The Valor Wall Switch Press The Down Button.

Assure the pilot is still burning and turn the knob to the “on” position. Using the valor wall switch press the down button. Continue to hold the knob in until you see that the pilot is staying lit.

Using The Remote, Hold The Small Flame Button Until The Flame Goes Out.

If the pilot light does not engage on the first try, you may have to hold down the knob long enough to purge the air out of the gas line. How do you light the pilot light on a gas fireplace? Turn the gas valve back on and attempt to.

Now, Use A Can Of Air Pressure Gently To Remove Dirt, Dust, And Debris.

Depending on how long it’s been since the gas fireplace was last used, ignition may take multiple attempts. A gas fireplace pilot light, which can also be referred to as just the pilot in a gas fireplace, is an important part of gas fireplace design and essential for helping gas fireplace flames to start quickly and efficiently. Keep trying periodically to light the pilot light.

Once The Pilot Lights, Keep Holding Down The Gas Control Knob For 20 To 30 Seconds To Allow Time For Heating Up The Thermocouple (A Safety Device), Then Release The Knob So It Pops Back Up.

Hold it down for at least 30 seconds in order for the thermocouple to get warmed up. Turn your pilot light on and off from the remote control. At that point, you can then turn the knob to the on position.

What Do I Do When My Gas Pilot Light Won’t Light?

Turn off the fireplace if it is on and shut off the main gas valve. If the pilot light goes out completely, turn the pilot light control knob to the pilot position and push the knob in while lighting the pilot with a match or torch lighter. (see below) turn your gas.

Leave a Reply